*For these instructions, the Brother QL-720NW printer is used. Replace whichever printer you are using in the instructions. 

 

To connect the printer to VisitU app:

  1. Open up the VisitU app

  2. Press the gear symbol in the bottom center of the screen to go to the settings

  3. Enter the pin 4575 

  4. Click the magnifying glass in the selected printer section. Even if it appears to already be connected to the printer, follow this step.

  5. Select Brother QL-720NW  

  6. In the bottom right, select “Save”

  7. Click “Back” to go to the VisitU homepage



To connect the printer to the Brother app:

  1. Open the Brother iPrint&Label app

  2. In the top left of the screen, select the gear.

  3. Click on “Printer”

  4. Make sure that the QL-720NW printer is selected. UIt should have a check mark next to it

  5. Once you select the QL printer, it will send you back to the previous screen. Then, click “Done”

  6. Click on one of the templates that you want to use. Edit it as you need. Once you are done editing, click “Print” in the top right corner.

  7. Make sure the QL printer is selected 

  8. Click print